Controls

1. Tap “Turn on” above — the screen lowers and the projector warms up, which takes about [30 seconds].
2. Pick what you want to watch with the [Firestick remote].
3. Set the sound from the Whole-House Audio card below.
4. When you’re done, tap “Off” — the projector cools itself down and the screen raises on its own.

Never unplug the projector to turn it off — always use “Off.” Cutting power mid-use can shorten the bulb’s life.

1. Turn the receiver on above, then pick a source — [Firestick] for streaming, or Bluetooth to play from your own phone.
2. Set the overall volume here.
3. In each room, use the [Nuvo keypad on the wall] to turn that zone on and set how loud it is there.

Please keep the volume neighborly after [10 pm], especially outdoors.

1. Say “Alexa, play [something]” out loud.
2. Use ⏸ to pause and ▶ to pick back up, and ⏭ to skip a track.
3. Set the volume with the slider, or the − and + buttons for a small nudge.

These buttons run whatever is already playing — to start something new, just ask Alexa out loud.

1. Pick the zone you want — Villa Bedroom or West Wing Hall.
2. Use − and + to set the temperature. The big number is the target; the small one is what it actually is right now.
3. Choose Cool, Heat, or Off for that zone.
4. Give it a few minutes — the system takes a little while to catch up.

If a zone is not responding, check that its mode is not set to Off.